Konica Minolta Di1610 用户手册
3
3.6 Useful Functions
3-12
Di1610/Di1610p
B
e
fo
re
Ma
ki
ng
C
o
pi
es
Chap
ter
3
3.6
Useful Functions
Panel Resetting
Press the [Panel Reset] key to return all modes and functions (zoom ratio, number
of copies, etc.) to their defaults. (All selected settings are canceled.)
of copies, etc.) to their defaults. (All selected settings are canceled.)
✎
Tip
The [Panel Reset] key comes in handy for canceling all selected settings at one
time.
To avoid accidentally using settings from the previous copy job, press the [Panel
Reset] key to return all functions and settings to their defaults before specifying
any settings for your current job.
The [Panel Reset] key comes in handy for canceling all selected settings at one
time.
To avoid accidentally using settings from the previous copy job, press the [Panel
Reset] key to return all functions and settings to their defaults before specifying
any settings for your current job.
Auto Panel Reset
Even if the [Panel Reset] key is not pressed, the machine automatically resets all
functions and settings to their defaults 1 min after a copy cycle has been completed
or a key operation is performed.
functions and settings to their defaults 1 min after a copy cycle has been completed
or a key operation is performed.
✎
Tip
The length of time before the machine automatically resets itself can be set
between 1 min and 5 min in addition to 30 seconds. The Auto Panel Reset
function can even be disabled.
For details, refer to “Specifying the Setting for “AUTO PANEL RESET”” on
page 5-4.
The length of time before the machine automatically resets itself can be set
between 1 min and 5 min in addition to 30 seconds. The Auto Panel Reset
function can even be disabled.
For details, refer to “Specifying the Setting for “AUTO PANEL RESET”” on
page 5-4.
Energy Save Mode
Instead of turning off the machine, it can be set into a standby state (Energy Save
mode).
mode).
If the machine is not used for a set length of time, it will automatically enter the
Energy Save mode. The default length of time is 15 min.
Energy Save mode. The default length of time is 15 min.
To cancel the Energy Save mode, press any key on the control panel.
✎
Tip
The length of time before the machine enters the Energy Save mode can be set
between 1 min and 240 min.
For details, refer to “Specifying the Setting for “ENERGY SAVE MODE”” on
page 5-5.
The length of time before the machine enters the Energy Save mode can be set
between 1 min and 240 min.
For details, refer to “Specifying the Setting for “ENERGY SAVE MODE”” on
page 5-5.