Seiko Instruments DPU-30 用户手册

 

 

 

 

 

Do not drop any metallic objects or liquids such as water or coffee into the 
printer.

 

 

Never use the printer in a place of extreme humidity or any place where it 
can possibly be splashed by any liquids. If any liquids get into the printer, it 
could lead to fire, electric shock, or other serious accidents.

 

 

Never touch the thermal head immediately after printing because it 
becomes very hot. Make sure that the thermal head is cool before setting 
papers or cleaning the thermal head.

 

 

Be sure to hold the connector part of the power cable when disconnecting 
the cable. Pulling on the cable portion may cause it to fray and break.

 

 

Power OFF the printer in any of the following cases:

 

• 

The printer does not recover from an error.

 

• 

Smoke, strange noise or smells erupt from the printer.

 

• 

A piece of metal or any liquid touches the internal parts or slot of the 

printer. 
Using the printer in any manner other than for which it was designed may 
cause accidents or fire.

 

 
 
1.2  NOTES ON USE

 

•  Do not disassemble or repair the printer by yourself. 

•  Do not drop the printer down on the floor or hit it against the walls. 

•  Avoid exposure to the water. 

•  Use the specified type of thermal paper. 

•  When a trouble such as a paper jam occurs, turn off the power first to fix it. 

•  The printer does not receive the data in some cases such as a paper out. Monitor the printer 

to check if an error occurs and not to stop the system. 

•  Fix an error if something happens to the printer in order to prevent the whole system from 

hanging up. Thus, you need to take an action to prevent the error from affecting the whole 
system. 

•  Immediately turn off the power if the printer fails (for example, you smell something strange, 

hear a noise, or smoke rises from the printer). After checking that such failure does not 
continue, contact your dealer or us.