Lexmark 249X 用户手册
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
15
Section 1: Introduction
Ribbon Specifications
The life expectancy of the 2300/2400 series standard re-inking ribbon is
approximately 4 million characters in 10 characters per inch (cpi) draft mode.
For replacement ribbon, order ribbon number 11A3540.
approximately 4 million characters in 10 characters per inch (cpi) draft mode.
For replacement ribbon, order ribbon number 11A3540.
Length:
1.8 m (6.0 ft)
Width:
8 mm (0.315 in.)
Fabric:
Nylon
High yield re-inking ribbon is available for the 2400 series printer. It has a life
expectancy of approximately 8 million characters in 10 cpi draft mode. For
replacement ribbon, order ribbon number 11A3550.
expectancy of approximately 8 million characters in 10 cpi draft mode. For
replacement ribbon, order ribbon number 11A3550.
Length:
2.5 m (8.3 ft)
Width:
8 mm (0.315 in.)
Fabric:
Nylon
Diagnostics
This section discusses diagnostics at power-on and how to do the printer test.
Power-On Diagnostics
The following tests are performed when the printer is turned On.
• RAM
Test
• Font
ROM/Microcode
Sum
Test
• Timer/Interrupt
Controller
Test
• NVRAM
Test
•
Switch Scan Test of the operator panel
• Carrier
Initialization
• Paper
Feed
Initialization
If any errors occur during the tests, a combination of blinking LEDs indicate
which test failed.
which test failed.
Printer Test
You can run a Printer Test to aid in problem determination. In addition to the
normal power-on internal tests (see “Power-On Diagnostics” on page 15), the
printer test generates a sample printout.
normal power-on internal tests (see “Power-On Diagnostics” on page 15), the
printer test generates a sample printout.
This test printout can be printed either with or without connecting the printer to
your computer.
your computer.