Primera Technology LX200 用户手册

A.

INSTALLING THE PC SOFTWARE

The Installer Disc has a menu that will guide you through 

the process of setting up your duplicator. Please refer to the 

following for more information on each step:
1.  Place the Installer CD in your CDRom Drive. The Installer

application should automatically launch in a few moments.

If it does, proceed to Step 2. If it does not automatically

launch, follow these steps:
•

Double-click the My Computer Icon, then double-click

the icon of the appropriate CD drive containing the

Software Installer disc.

•

Double-click Installer.exe

2.  In the Installer Application, click the Standard Install

button. The on screen instructions will guide you step-by-

step through the installation process. 

B.

CONNECTING POWER

1.  Locate the power adapter

supplied with your printer.

2.  Place one end of the adapter

cord into the power port on

the rear panel of the printer.

3.  Plug the power cord of the

adapter into an available wall outlet or surge protecting

power strip.  Once the power cord is connected, the printer

can be switched on and off using the power switch.

C. CONNECTING THE USB CABLE / INSTALLING THE 

PRINTER DRIVER

Connect the printer to your PC with

your beige USB 2.0 Cable.

511203.qxd  8/7/2008  2:21 PM  Page 5

TOC

INDEX