Xerox 550 用户手册

The minimum measured value of the output density that
is accepted for correction.

●

Properties—The parameters that were selected when the
calibration table was created.

Calibration table Info Graph tab

During printing, the CX print server automatically replaces the
CMYK values in the RTP file with new values that compensate for
the printer’s current performance level.

This tab includes the following:

The graph displays cyan, magenta, yellow, and black
separations. You can see information about each
separation by clicking the desired separation button. Or you
can view all the separations together, by clicking the button
that shows all four colors.

The vertical axis represents the dot percentage values of
the final output data (after applying the calibration table)
that is sent to the printer.

The horizontal axis represents the dot percentage values of
the RTP file.

Adding an entry to a calibration table

You can review a calibration table to make sure that the curves
are relatively smooth and continuous. If you are not satisfied with
the results, the Editor tab enables you to adjust the values of the
image in the value table.

1. From the Tools menu, select Resource Center.
2. In the Resource list, select Calibrations.
3. Select the calibration table that you want to add an entry, and

click the Editor tab.

4. From the Separation list, select the desired separation to that

you want to add an entry.

The file and printer values for the separation that you selected
appear in the File Value and Printer Value lists.

5. Select a row in the value table, and click the Add button.

Calibration table Info Graph tab

51