Xerox 8830 用户手册

To adjust the power saver: 

1.  Press the Menu key.  The MAIN MENU screen is displayed. 

2.  Press the Enter key to select CONFIGURATION.  The 

CONFIGURATION menu screen is displayed. 

3.  Press the Next key until POWER SAVER is highlighted. 

4.  Press the Enter key to select POWER SAVER.  The POWER 

SAVER screen is displayed. 

POWER SAVER

 POWER SAVER DELAY (0 

−

 4 HR):  3

 

5.  Use the numeric keypad to enter the power saver value.  The 

valid value range is 0 to 4 hours.  The factory default is 3 hours. 

6.  Press the Enter key to confirm the value. 

7.  Press the Exit key to return to the CONFIGURATION menu 

screen. 

The SCANNER CONTROL option of the CONFIGURATION menu allows 
you to set the options for how the Scanner starts and finishes a scan.  It 
contains the following features: 

• 

AUTOSCAN - Tells the Scanner either to start the scan 
automatically when the document is inserted (ENABLED), or to 
wait until the Start key is pressed (DISABLED).  ENABLED is 
the factory default setting. 

• 

DOCUMENT RETURN  - Tells the Scanner, after the scan, either 
to return the document to the front of the Scanner (FRONT), or 
to drop the document from the rear of the Scanner into the catch 
tray (REAR).  REAR is the factory default setting. 

• 

MODE: 

• 

MANUAL WIDTH - The user must enter the document width 
and very carefully center the document. In this mode the 
document will be prescanned. 

• 

AUTOWIDTH - Enables the automatic detection of the width 
of the document. . In this mode the document will be 
prescanned. 

• 

AUTOWIDTH/AUTOCENTER  - Enables the automatic 
centering of the image and automatic width detection. This 
selection is the default. . In this mode the document will be 
prescanned. 

• 

PRODUCTIVITY:. This feature does not use AUTOCENTER 
requiring the operator to manually align the document within