Xerox 8830 用户手册

MOTOR SPEED

EXPECTED LENGTH

:

610

MEASURED LENGTH:

0

PRESS START TO ADJUST SPEED

 

 

Select the LEAD EDGE/TRAIL EDGE option to execute the lead 
edge/trail edge adjustment diagnostic. 

To run the LEAD EDGE/TRAIL EDGE diagnostic: 

1.  Press the Menu key.  The MAIN MENU screen is displayed. 

2.  Press the Next key until DIAGNOSTICS is highlighted. 

3.  Press the Enter key to select DIAGNOSTICS.  The 

DIAGNOSTICS menu screen is displayed. 

4.  Press the Next key until SCANNER DIAGNOSTICS is displayed. 

5.  Press the Enter key to select SCANNER DIAGNOSTICS.  The 

SCANNER DIAGNOSTICS menu screen is displayed. 

6.  Press the Next key until COMPONENT TESTS is highlighted. 

7.  Press the Enter key to select COMPONENT TESTS.  The 

COMPONENTS TESTS menu screen is displayed. 

8.  Press the Enter key to select LEAD EDGE/TRAIL EDGE.  The 

LEAD EDGE/TRAIL EDGE ADJUSTMENT screen is displayed. 

LEAD EDGE/TRAIL EDGE

ADJUSTMENT

 PRESS START TO BEGIN

 

9.  Insert a black sheet (8.5 X 11) of paper into the Scanner. 

10.  Press the Start key to begin the diagnostic.  When the diagnostic 

completes, the last line of the display is replaced with a status 
line indicating PASS or FAIL.  The last line may also display as 
NO RESPONSE FROM SCANNER if the Scanner does not 
process the request within the timeout period. 

11.  Press the Enter key to return to the COMPONENT TESTS menu 

screen. 

 

Select the SENSORS option to display the current state of the Scanner 
optical paper sensors, calibration home sensor, and the thick document 
sensor. 

To display the status of the sensors: