Xerox 8830 用户手册
48
•Making copies
XEROX WIDE FORMAT COPY SYSTEM
READY position at the completion of the scan. When the DOCUMENT
RETURN feature is set to REAR, the Scanner delivers the document to
the rear Stacker at the completion of the scan.
RETURN feature is set to REAR, the Scanner delivers the document to
the rear Stacker at the completion of the scan.
Some documents will always exit to the rear at the completion of the
scan regardless of the DOCUMENT RETURN setting. These documents
include:
•
Thick documents
•
Documents longer than 5 feet (1.52 meters)
•
Documents over 36 inches (914 mm) in width
MODE:
MANUAL
The user must enter the width of the document manually, and very
carefully center the document when inserting it into the Scanner. The
document is prescanned in this mode.
carefully center the document when inserting it into the Scanner. The
document is prescanned in this mode.
AUTOWIDTH
AUTOWIDTH enabled is the default setting. When AUTOWIDTH is
selected, the Scanner automatically detects the width of the
document.AUTOWIDTH/AUTOCENTER. The document is prescanned in
this mode.
selected, the Scanner automatically detects the width of the
document.AUTOWIDTH/AUTOCENTER. The document is prescanned in
this mode.
When AUTOWIDTH/AUTOCENTER is enabled, the Scanner
automatically centers the image and automatically detects the document
width.
automatically centers the image and automatically detects the document
width.
PRODUCTIVITY - ANSI
PRODUCTIVITY is only available on Scanners with AccXES firmware
10.0 or higher, Scanner firware 3.2.5
10.0 or higher, Scanner firware 3.2.5
and the Productivity Document
Feed Tray that includes discrete width sensors. PRODUCTIVITY - ANSI
is the default. Other media type selections include ARCH, ISO A, ISO B,
JIS B and CUSTOM. These selections must be made so that the sensors
detect the correct width. This feature eliminates the prescan width
measurement, which increases document throughput speed resulting in
greater productivity. CUSTOM requires standard media sizes to be
entered in CUSTOM MEDIA FORMATS.
is the default. Other media type selections include ARCH, ISO A, ISO B,
JIS B and CUSTOM. These selections must be made so that the sensors
detect the correct width. This feature eliminates the prescan width
measurement, which increases document throughput speed resulting in
greater productivity. CUSTOM requires standard media sizes to be
entered in CUSTOM MEDIA FORMATS.
AUTOWIDTH and AUTOWITH/AUTOCENTER are not available in this
mode.
mode.
Reference Menu, CONFIGURATION>SCANNER CONTROL, MODE: for
additional information.
additional information.