Xerox 8830 用户手册

and the Printer Interrupt indicator lamp illuminates.  The Printer 
immediately prints a sample of the next image inserted into the 
Scanner.  The SAMPLE MODE screen is displayed. 

SAMPLE MODE

PRESS START TO ACCEPT PAGE.
PRESS C/CA TO REJECT.

 

2.  Do one of the following: 

• 

Press the Start key to print the complete image as a full-size 
copy. 

• 

Press the C/CA key to delete the scanned image. 

3.  Press the Sample key again to disable the Sample feature.  The 

Printer is returned to the default priority setting and the Sample 
and Printer Interrupt indicator lamps are extinguished. 

The best sample prints will be produced if the image enhancement 
features have been enabled. Refer to the Image Quality section for more 
information. 

In order to have the selections indicated below in the SAMPLE MODE 
screen, the Scan-to-Net feature key must be installed to get SCAN 
IMAGE TO FILE, and the  Scan-to-Print Feature key must be installed to 
get SCAN IMAGE TO PRINTER. The Scan-to Print feature is useful on 
the X2 TECH that does not have a  COPY Mode. However it is 
convenient on the other WIDE FORMAT COPY SYSTEMS to be able to 
make a sample before scanning an image to file. 

To print a sample copy, perform the following: 

1.  If the scanner is set to COPY mode switch to SCAN mode for 

instructions, refer to “Switching between COPY mode and SCAN 
mode”  

2.  Enter the Directory name. 

3.  Press the Sample special function key. The SAMPLE MODE 

screen is displayed. 

SAMPLE MODE

4

  SCAN IMAGE TO FILE

       SCAN IMAGE TO PRINTER

 

4.  Press the Next key to highlight SCAN IMAGE TO PRINTER.