Xerox 8830 用户手册

• 

Specifying the output format - The image file always has the 
format of the length of the document by the scan width.  The 
scan width can be manually specified, if the entire width of the 
document is not desired.  Refer to "Scanner Control" in the "Main 
Menu" section to enable or disable manual specification of the 
scan width. 

• 

Selection of Margins or Justification  - You can crop equal 
amounts from each side edge of the document by manually 
specifying a scan width that is narrower than the actual 
document.  Refer to "Scanner Control" in the "Main Menu" 
section to enable or disable manual specification of the scan 
width. 

• 

Specification of Finishing Options - Since there is no physical 
output, the finishing operations are not applicable. 

• 

Selection of Reduce/Enlarge - The electronic file is saved 
without alteration, so all scanned information is preserved. 

• 

Selection of Image Type.  Only Line ,Photo, Normal, and Color 
image types are valid for SCAN mode. Refer to the "Image 
Quality", "Scan Mode" section in this manual for additional 
information 

• 

Background Suppression - This selection is automatically 
switched to off if a color printer is connected. 

To scan documents for later retrieval over the network: 

1.  If job accounting is enabled, enter in your User ID and Account 

ID when prompted and press Enter.  If job accounting is not 
enabled, you will not have to enter your IDs. 

2.  If you want to see a preview of the scanned images when they 

are retrieved from the Controller to your workstation, verify that 
the scanner's default "PREVIEW" box is checked when selecting 
the Original, Type  Use the Previous, Next, and Enter keys to 
enable PREVIEW. Use the Enter key to confirm your choice(s). 

3.  With  READY TO COPY displayed on the Scanner Control Panel, 

press the Mode key to display READY TO SCAN. 

4.  Use the keypad on the Scanner Control Panel to enter in your 16 

alphanumeric character Scan Directory name.