Xerox 8855 用户手册
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide
50
Special features keys (continued)
Sets Build key
The Sets Build mode allows you to scan a series of images and build an
electronically collated set. Once the set is built, one or more collated copies
can be printed.
electronically collated set. Once the set is built, one or more collated copies
can be printed.
NOTE: The Sets Build mode is not available unless the Synergix Digital
Solution is in the COPY mode.
Solution is in the COPY mode.
If the set is to be processed by a finishing device, such as a folder, press the
Finisher key and configure the options for the finishing device before enabling
the Sets Build option. While the Sets Build mode is active, the finisher
options cannot be changed.
Finisher key and configure the options for the finishing device before enabling
the Sets Build option. While the Sets Build mode is active, the finisher
options cannot be changed.
Preparing to build the set
In Sets Build mode, documents of C (A2) size and larger are normally
delivered to the rear of the Scanner after the scan. If the DOCUMENT
RETURN parameter is set to REAR, then all documents are delivered to the
rear after scanning. The Synergix Scan Digital Solution is equipped with a
document catching device, called the Stacker, to receive these documents.
Refer to "Scanner Control" in the "Main Menu" section for further information
about the DOCUMENT RETURN parameter.
delivered to the rear of the Scanner after the scan. If the DOCUMENT
RETURN parameter is set to REAR, then all documents are delivered to the
rear after scanning. The Synergix Scan Digital Solution is equipped with a
document catching device, called the Stacker, to receive these documents.
Refer to "Scanner Control" in the "Main Menu" section for further information
about the DOCUMENT RETURN parameter.