Xerox 8855 用户手册
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide
53
Special features keys (continued)
Transform key
The Transform feature contains the following menu choices:
MARGINS - Allows you to adjust the dimensions of the margins around the
image. By entering positive margins, blank space is inserted around the
image. By entering negative values, unwanted parts of the image can be
cropped.
image. By entering negative values, unwanted parts of the image can be
cropped.
JUSTIFICATION – Allows you to adjust the position of the image on the
media.
TRANSFORM – Allows you to request transformation of the scanned image
into a mirror image, a negative photographic inversion, or both.
NOTE: The image can also be rotated. Refer to "Imaging" in the "Copy
Options" section for further information about image rotation.
Options" section for further information about image rotation.
To access the TRANSFORM MENU:
1. Press
the Transform key. The TRANSFORM MENU screen is
displayed. The selected option is highlighted.
2. Press
the
Previous or Next key to highlight the desired option.
3. Press
the
Enter key to select the highlighted option. The screen for the
selected option is displayed.
Margins
The MARGINS option of the TRANSFORM MENU allows you to select the
dimensions for the margins that surround an image. These margins are
referred to as the lead, left, right and trail edges.
dimensions for the margins that surround an image. These margins are
referred to as the lead, left, right and trail edges.
NOTE: Margins can only be adjusted when the Synergix Digital Solution is in
the COPY mode.
the COPY mode.
The example below illustrates an image entering the Scanner and the
orientation of the image margins.
orientation of the image margins.
Margins are added to the image in one of two ways:
• If Synchro has been selected from the Output Format area of the
Scanner Control Panel, the lead margin is added before the image is
printed. The trail margin is added after the media cut signal is received
from the Scanner. Thus, the length of the media from the Printer will be
the scanned document length plus the lead and trail margins.
printed. The trail margin is added after the media cut signal is received
from the Scanner. Thus, the length of the media from the Printer will be
the scanned document length plus the lead and trail margins.
• If a fixed media length (Preset or Manual) has been selected as the
Output Format, the white space of the specified margin surrounds the
image, but the actual physical dimensions of the media remain as
specified. The margins reduce the allowable area on the media in which
the image may be placed.
image, but the actual physical dimensions of the media remain as
specified. The margins reduce the allowable area on the media in which
the image may be placed.
Scanner
Left image edge
Right image edge
Trail edge
Lead edge
TRANSFORM MENU
MARGINS
JUSTIFICATION
TRANSFORM
JUSTIFICATION
TRANSFORM