Xerox 3124 用户指南

5.6   

<Loading print media>

Load the paper in the manual tray with the side to be printed on 
facing up. 

Adjust the manual tray paper width guides to the width of the paper. 
Do not force too much, or the paper will bend, which could result in 
a paper jam or skew.

When you print a document, set the paper source to Manual 
Feeder and select the appropriate paper size and type in the 
software application. See the Software Section. 

Print a document.

Press the Cancel button.

The printer picks up the print media and prints.

Insert the next sheet into the manual tray and press the Cancel 
button. 

Repeat this step for every page to be printed.

• If you do not press the Cancel button, after a pause the printer 

will automatically pick the print media.

 

The output tray collects paper face down, in the order in which the sheets 
were printed. 

• If you continuously print many pages, the surface of the output 

tray may become hot. Be careful not to touch the surface, and 
especially keep children away from the surface.

• The output tray can hold up to 100 sheets of 75 g/m

2

 (20 lb) 

plain paper. Remove the pages so that the tray is not 
overloaded.

output tray