Xerox 3124 用户指南

Installing Printer Software in Windows

7

When you connect your printer to a network, you must first 
configure the TCP/IP settings for the printer. After you have 
assigned and verified the TCP/IP settings, you are ready to 
install the software on each computer on the network.

You can install the printer software using the typical or custom 
method.

This is recommended for most users. All components necessary 
for printer operations will be installed.

Make sure that the printer is connected to your network 
and powered on. For details about connecting to the 
network, see the supplied printer’s User’s Guide.

Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation 
window appears.
If the installation window does not appear, click Start and 
then Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive and click OK.

Click Install Software. 

Select Typical installation for a network printer. Click 
Next.

The list of printers available on the network appears. 
Select the printer you want to install from the list and then 
click Next. 

• If you do not see your printer on the list, click Update to 

refresh the list, or select Add TCP/IP Port to add your 
printer to the network. To add the printer to the 
network, enter the port name and the IP address for the 
printer.
To verify your printer’s IP address or the MAC address, 
print a Network Configuration page.

• To find a shared network printer (UNC Path), select 

Shared Printer [UNC] and enter the shared name 
manually or find a shared printer by clicking the Browse 
button.

After the installation is finished, a window asking you to 
print a test page appears. If you choose to print a test 
page, select the checkbox and click Next.
Otherwise, just click Next and skip to step 8.