Xerox 180 EPS 用户手册
Operator Guide
5- 29
Troubleshooting
NOTE: If your printer has frequent jams in this area, you may
need to clean the Q1106 sensor.
need to clean the Q1106 sensor.
Figure 5-19 Area 18
Points to note for clearing jams in area 18:
•
Sometimes the display monitor messages direct you to discard
the last sheet delivered to the stack following a jam in area 18.
Check for this message when clearing an area 18 paper jam.
the last sheet delivered to the stack following a jam in area 18.
Check for this message when clearing an area 18 paper jam.
•
If your printer has frequent jams in this area, you may need to
clean the Q1107 sensor.
clean the Q1107 sensor.
•
If your printer has a bypass transport module, you should
check for paper jams in areas 19 and 20 after clearing an area
18 paper jam.
check for paper jams in areas 19 and 20 after clearing an area
18 paper jam.
Clearing a paper jam in the bypass transport
1. Open the bypass transport module door.
2. Press the area 19 green lever in the direction of the arrow
printed on it.