Xerox 7665 用户手册

221

When the machine has a network controller and is connected over the network, it is possible to run the 
Image Overwrite function using a web browser. This is performed using CentreWare Internet Services.

NOTE: All existing jobs, regardless of their state, shall be deleted and all job submission will be 
prohibited for the duration of the overwrite. The power on/off button will be ignored during image 
overwrite.

IMPORTANT: The machine should not be in diagnostics mode when the Overwrite is started. (The 
machine screen indicates a status of 'Diagnostics Mode'- this mode is used by a Customer Service 
Representative when servicing the machine.) The machine should not be used to perform any jobs 
and the power should not be switched off while an Overwrite is being performed.

Before starting the procedure, please ensure the following items are available or have been performed:

1.

Ensure the machine is fully functioning on the network.

2.

Ensure that the TCP/IP and HTTP protocols are configured on the device and fully functional. This is 
required to access CentreWare Internet Services. To check to see if TCP/IP and HTTP are configured, 
use a web browser on a TCP/IP enabled workstation and enter the IP address of the multifunction 
device in the Address field of the browser.  Press [Enter].  If correctly configured, the Internet Services 
web page should display.  If it does not, refer to the Read Me topic in this guide.

3.

Ensure that no one is currently using the machine.

1.

Open your Web browser and enter the IP address of the machine in the Address or Location field. 
Press [Enter].

2.

Click the [Properties] tab.

3.

Enter the Administrator User name and password if prompted.  The default is [admin] and [1111].

4.

Select Security

5.

Locate, then click [On Demand Overwrite].  This should be located in the Security group of links.

6.

Click [Manual] and then the [Start] button.

7.

Click [OK]. The overwrite will commence. The machine will be taken offline and will be unable to 
receive any incoming jobs. Any existing jobs in the queue will be deleted. The Image Overwrite will 
overwrite all image data on the hard disk. The process will take approximately 20 minutes.

8.

Following completion of the Overwrite, the On Demand Overwrite completion screen appears. Touch 
[Close]. The network controller will reboot and network functionality will be unavailable for several 
minutes. Once rebooted, the Disk Overwrite confirmation report will print. This details the status and 
time of the overwrite.

To verify the overwrite has completed view the Confirmation Sheet, under Confirmation Details. The 
Job Information: Status ESS Disk should read 'SUCCESS'.