Allied Telesis AT-9900 用户手册

Software Version 2.8.1
C613-10477-00 REV B

CREate QOS PORTGroup=group-list [POrt=port-list] 

[DESCription=description]

This new command creates a port group so that a policy can be attached to it. A 
switch instance refers to a single switch chip; port

 

groups cannot span multiple 

switch instances

.

To create port group 1, name it “uplink”, and assign port 3 and ports 5 to 10 to 
uplink, use the command:

cre qos portg=1 po=3,5-10 desc=uplink

create qos trafficclass=trafficclass-list 

[stormstatus={enable|disable}] 

[stormwindow={windowsize|none}][stormrate={rate|none}]

[stormaction={linkdown|portdisable|vlandisable}] 

[stormtimeout={timeoutlength|none}]

[other-parameters]

PORTgroup

Port group that you want to create. The group-list consists of:

• one or more port groups
• a range specified with a hyphen, such as 1-4
• a comma-separated list of numbers and/or ranges
• an integer from 1 to 32

Default: no default

POrt

Port to add to this port group. The port-list consists of:

• one or more ports
• a range specified with a hyphen, such as 1-4
• a comma-separated list of numbers and/or ranges

Default: no default

DESCription

Description of the port group.

Default: no default

STORMStatus

Whether storm protection is enabled for the default traffic class.

Default: disabled

STORMWindow

Time between the polling of traffic class counters that checks 
whether storm protection should be activated. Required when storm 
protection is enabled. 

Default: none

Number of milliseconds from 100 to 60 000.

NONE

Storm protection is inactive.