Allied Telesis AT-9900 用户手册
Software Version 2.8.1
133
Software Version 2.8.1
C613-10477-00 REV B
C613-10477-00 REV B
reset qos portgroup counters
Syntax
RESET QOS PORTGroup=group-list COUnters
TRafficlass[={trafficclass-list|DEFault|ALL}]
Description
This new command resets traffic class counters for a port group. Use the set
switch enhancedmode
switch enhancedmode
command in the Switching chapter to set counters
.
Example
To reset all traffic classes configured on port groups 1, 2, 3, 4, use the command:
reset qos portg=1-4 cou tr
set qos policy
Syntax
SET QOS POLIcy=id-list
[dtcstormstatus={enable|disable}]
[dtcstormwindow={windowsize|none}]
[dtcstormrate={rate|none}]
[dtcstormaction={linkdown|portdisable}]
[dtcstormtimeout={timeoutlength|none}]
[other-parameters]
Parameter
Description
PORTgroup
Port group for which you want to clear counters. The group-list consists
of:
of:
• one or more port groups
• a range specified with a hyphen, such as 1-4
• a comma-separated list of numbers and/or ranges
• an integer from 1 to 32
• a range specified with a hyphen, such as 1-4
• a comma-separated list of numbers and/or ranges
• an integer from 1 to 32
Default: no default
TRafficclass
Traffic class counters to clear for this port group.
Default: all
trafficclass-list Specific traffic class that consists of:
• one or more traffic classes
• a range specified with a hyphen, such as 1-4
• a comma-separated list of numbers and/or ranges
• an integer from 0 to 1023
• a range specified with a hyphen, such as 1-4
• a comma-separated list of numbers and/or ranges
• an integer from 0 to 1023
DEFault
The default traffic class.
ALL
Resets counters for all traffic classes attached to the
port group. Also resets all of them if you enter no
value.
port group. Also resets all of them if you enter no
value.