Allied Telesis AT-9900 用户手册

ENAble EPSR={epsr-name|ALL} DEBug={INFo|MSG|PKT|STAte|ALL} 

[OUTput=CONsole] [TIMEOut={1..4000000000|NONE}]

This command enables debugging for either the selected EPSR instance, or all 
EPSR instances.

To enable all debugging modes on the EPSR instance called blue, use the 
command:

ena epsr=blue deb=all

disable epsr debug
show epsr debug

EPSR

The EPSR instance whose debugging is to be enabled.

Default: no default

epsr-name

The name of the EPSR instance. This can be a character 
string, 1 to 15 characters long. Valid characters are 
uppercase letters (A-Z), lowercase letters (a-z), digits (0-9), 
the underscore character ("_"), the hyphen character ("-"). 
The epsr-name cannot be ALL.

ALL

All EPSR instances.

DEbug

The debugging modes to be enabled.

Default: no default.

INFo

General information about the EPSR instance selected.

MSG

Decoded display of received and transmitted EPSR frames.

PKT

Raw ASCII display of received and transmitted EPSR frames.

STAte

EPSR state transitions.

ALL

All debug options. 

OUTput

When this parameter is set to console, all debugging information will be 
sent to the console. By default, the debugging data is sent to the port that 
received the enable epsr debug command. Use this option if the enable 
epsr debug command is used in a script, because a script is not received 
on a port.

TIMEOut

The number of seconds during which debugging is enabled on the 
specified EPSR instances. Limiting the debugging period reduces the risk of 
overloading the switch with debugging information. This value set in this 
command overrides all previous EPSR debugging timeout values for the 
specified EPSR instances, even if they were specified for other debugging 
modes.

Default: the most recent timeout value set in an enable epsr debug 
command for the given EPSR instance, or none if none had been set.