Barco PFWX-51B & PFWU-51B 用户手册
PFWX-51B/PFWU-51B 10/02/2014
7
2.General
After unpacking let the projector acclimatizes to a room temperature higher then 5°C (41°F) and lower then
35°C (95°F). Neglecting this may result in a start up failure of the Light Processor Unit.
35°C (95°F). Neglecting this may result in a start up failure of the Light Processor Unit.
Save the original shipping carton and packing material, they will be necessary if you ever have to ship your
projector. For maximum protection, repack your projector as it was originally packed at the factory.
projector. For maximum protection, repack your projector as it was originally packed at the factory.
2.3 Initial inspection
General
Before shipment, the projector was inspected and found to be free of mechanical and electrical defects. As soon as the
projector is unpacked, inspect for any damage that may have occurred in transit. Save all packing material until the inspection
is completed. If damage is found, file claim with carrier immediately. The Barco Sales and Service office should be notified as
soon as possible.
projector is unpacked, inspect for any damage that may have occurred in transit. Save all packing material until the inspection
is completed. If damage is found, file claim with carrier immediately. The Barco Sales and Service office should be notified as
soon as possible.
Box content
After unpacking the projector it is recommended to check if all following items where included:
• Projector with standard lens mounted.
• Three power cords
• CD (Contents has this installation manual)
• One Safety manual
• One remote control unit (RCU)
• Two AAA size batteries for the RCU. Type: size-AAA (R03). Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteries
• Three power cords
• CD (Contents has this installation manual)
• One Safety manual
• One remote control unit (RCU)
• Two AAA size batteries for the RCU. Type: size-AAA (R03). Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteries
should be used.
Lamp is mounted inside the lamp house at delivery.
Mechanical check
This check should confirm that there are no broken knobs or connectors, that the cabinet and panel surfaces are free of dents
and scratches, and that the operating panel is not scratched or cracked. The Barco Sales and Service office should be notified
as soon as possible if this is not the case.
and scratches, and that the operating panel is not scratched or cracked. The Barco Sales and Service office should be notified
as soon as possible if this is not the case.