Barco PFWX-51B & PFWU-51B 用户手册

PFWX-51B/PFWU-51B  10/02/2014

11

2.General

obstruction. 

Ventilation inlet

Ventilation outlet

The following steps describe briefly how to setup your PFWX-51B/PFWU-51B projector in a table mount front projection. Note 
that each step refers to a corresponding procedure, which is more detailed and illustrated.

1.  Install the batteries of the remote control. See 

2.  Place the projector on a solid table in front of the screen at the expected throw distance. Adjust the feet to ensure that 

the projector is installed at right angles (horizontally and vertically) with the screen. See 

 and 

.

3.  Connect the projector with the local power net. See 

4.  Select and install an appropriate lens, which covers the throw ratio ( = screen size / projector screen distance).  

See 

.

5.  Switch ON the projector. See 

.

6.  Connect your source to the appropriate input module. See 

.

7.  Zoom and shift the lens until the image is properly projected on the screen, Do this by using the “ZOOM” and “FOCUS” 

ring on the lens. If necessary, level the projector from side to side by turning the adjustable feet in or out. See 

. or adjust the Lens Shift manually. See