Vanguard Managed Solutions 342 用户手册
Installation and Replacement
3-15
Cabling the Vanguard 342
Port Numbering for
Physical Ports 1
and 2
Physical Ports 1
and 2
Daughtercards installed in ports 1 and 2 must be configured correctly. For example,
if you have installed a Dual E&M daughtercard in port 1 you must configure the port
as an E&M port. In addition, use this port numbering scheme when configuring the
Vanguard 342:
if you have installed a Dual E&M daughtercard in port 1 you must configure the port
as an E&M port. In addition, use this port numbering scheme when configuring the
Vanguard 342:
Note
For more daughtercard configuration information, refer to Chapter Five of the
Daughtercard Installation Guide (Part Number T0020).
Daughtercard Installation Guide (Part Number T0020).
Daughtercard
Cable Information
Cable Information
Cables for optional daughtercards are shipped with the daughtercards. If your
Vanguard 342 is shipped with pre-installed daughtercards you will receive the
cables. For daughtercard installation and more cable information, please refer to the
Vanguard Daughtercard Installation Guide (Part Number T0020).
Vanguard 342 is shipped with pre-installed daughtercards you will receive the
cables. For daughtercard installation and more cable information, please refer to the
Vanguard Daughtercard Installation Guide (Part Number T0020).
5
RJ45
10/100BaseT
10/100BaseT Adapter
cable
cable
or standard UTP cable
(RJ45-to-RJ45)
(RJ45-to-RJ45)
10/100Mbps Auto
Sensing
Sensing
Interface # 1
8RJ45
10/100BaseT
10/100BaseT Adapter
cable
cable
or standard UTP cable
(RJ45-to-RJ45)
(RJ45-to-RJ45)
10/100Mbps Auto
Sensing
Sensing
Interface # 2
Port
Connector
Interface
Cable Required
(Application Specific)
Speed
DCE/DTE
(continued)
If the daughtercard is
installed in...
...and it has one port
connector, configure
port
...or it has two port
connectors,
configure port
Port 1
1
1 or 6
Port 2
2
2 or 7