ZyXEL Communications wireless n gigbit router zyxel 用户手册
Chapter 5 Tutorials
NBG-460N User’s Guide
78
5.3.1 Configuring Bob’s NBG-460N VPN Settings
To configure these settings Bob uses the NBG-460N Web Configurator.
1
Log into the NBG-460N Web Configurator and click VPN > Modify icon. This
displays the VPN Rule Setup (basic) screen.
displays the VPN Rule Setup (basic) screen.
2
Select the Active checkbox to enable the VPN rule after it has been created. Make
sure IKE is selected as the IPSec Keying Mode.
sure IKE is selected as the IPSec Keying Mode.
Figure 49 Tutorial: Property
3
Enter the IP address “192.168.1.35” in the Local Address text box. This is the IP
address of Bob’s computer. Enter the IP address “192.168.1.35” in the Local
Address End/Mask text box. This value is the same as Bob only wants Jack to
access this single IP address.
address of Bob’s computer. Enter the IP address “192.168.1.35” in the Local
Address End/Mask text box. This value is the same as Bob only wants Jack to
access this single IP address.
Figure 50 Tutorial: Local Policy
4
Enter the IP address “10.0.0.7” in the Remote Address Start text box. This is
the IP address of Jack’s computer. Enter the IP address “10.0.0.7” in the Remote
Address End/Mask text box. This value is the same as Jack only wants Bob to
access this single IP address.
the IP address of Jack’s computer. Enter the IP address “10.0.0.7” in the Remote
Address End/Mask text box. This value is the same as Jack only wants Bob to
access this single IP address.
Figure 51 Tutorial: Remote Policy
5
Enter the IP address “1.1.1.1” in the My IP Address text box. This is Bob’s WAN
IP address.
IP address.
6
Select IP as the Local ID Type. This is the type of content that will be used to
identify Bob’s NBG-460N. Enter the IP address “1.1.1.1” in the Local Content
text box. This identifies Bob’s NBG-460N to Jack’s NBG-460N.
identify Bob’s NBG-460N. Enter the IP address “1.1.1.1” in the Local Content
text box. This identifies Bob’s NBG-460N to Jack’s NBG-460N.