Siemens 090-010 用户手册
Industry Sector, IA&DT
SCE Training Curriculum
Page 50 of 118
To be used only at Educational and R&D Facilities
TIA Portal Module 090-010, Edition 03/2013
Unrestricted / © Siemens AG 2013. All Rights Reserved
SCE_EN_090-010_R1209_ WinCC Advanced with Runtime and TP700 Comfort Panel
8.
Settings on the TP700 Comfort Touch Panel
The most important panel settings have already been made in the device configuration of the panel in
the WinCC project.
Select the HMI_Panel [TP700 Comfort] and click the Load to device button.
These settings are written to the panel during loading.
The most important settings can also be made directly on the panel.
The Touch Panel TP700 runs under the Windows CE operating system and can be operated, like all
touch panels, directly on the screen. To make operation easier, you should use a touch pen or connect a
mouse to the panel's USB port.
The desktop and the Loader window appear after the panel starts up.
At the bottom edge of the screen, there is a taskbar which you can use to start programs or adjust
program settings, like with other Windows systems.
At the bottom edge of the screen, there is a taskbar which you can use to start programs or adjust
program settings, like with other Windows systems.
Loader buttons:
Transfer:
Data transfer becomes active and data can be read in from WinCC flexible.
Start:
Runtime is started and the process visualization appears on the panel.
Control Panel:
Windows CE Desktop opens.
Taskbar:
The taskbar opens.