Peerless Industries HDS200 用户手册

ISSUED: 07-24-12   SHEET #: 180-9023-1

HD Flow Pro Wireless Multimedia Kit provides Full HD 1080p signal transfer, including 3D signal*, without the 
hassle of running cables. Create brilliant HD quality multimedia for signage, presentations, or entertainment in 
any location,completely un-tethered to your source device!

By simply connecting the Transmitter to a multimedia device such as a computer, set-top box, or Blu-ray™ 
player and connecting the Receiver to a display device, instant real-time high defi nition digital audio and video 
can be placed into in any commercial or residential setting. HD Flow Pro Wireless Multimedia Kit transmits 
through walls and fl oors to allow the components to be neatly tucked away in an AV rack or media cabinet, 
and is the ideal solution for quick and easy installation where running cable is cost prohibitive or simply not an 
option. 

* Works with passive 3D signals

• Low 

latency: 

≤ 30ms.

• 

Supports both digital (HDMI) and analog (Component, Composite) video/audio.

• 

Supports Wireless or Wired connection - IEEE 802.11n 5 GHz WiFi, LAN connection.

• 

Two internal antennas (supporting MIMO).

• 

HDCP v1.1 compliant.

• 

Supports both DTV & VESA standards: DTV: 1920x1080i60/p60, 1280x720p60, 720x480i60/p60,
VESA : WSXGA+(1680x1050), SXGA(1280x1024), WXGA(1280x800), XGA(1024x768), 
SVGA(800x600), VGA(640x480).

• 

Supports passive 3D content.

• 

Plug and play setup requires no software programming.

Ensure that the following items are present in the package. If any items are missing or damaged, please call 
Peerless-AV Customer Care at 1-800-865-2112 (available 7:00am - 7:00pm CST Monday - Friday).

Transmitter

Remote Control

Receiver

IR-Flasher

Component
Adapter

Battery

Manual

Stand (2)

Quick Start Guide

AC Adapter (2)

IR-Extender

Step 7  While turning on the display device the HD Flow Pro Wireless Multimedia units will be going through the startup process. This process may 
take up to two minutes to complete. The Power/Link indicator lights on the Transmitter and the Receiver will be flashing at first. Flashing indicates 
that the units are establishing a secure connection. Wait until the connection is successfully established, indicated by the Power/Link indicator 
light becoming solid.

1 x Transmitter

1 x Receiver

2 x Stand

1 x Remote Control

1 x IR Flasher

1 x IR Extender

1 x Component Adaptor 

2 x Power Adapter

1 x Quick Start Guide

1 x Users Manual

Step 2   Connect the provided IR Flasher to the IR-OUT port on the Transmitter. 
Find the location of the IR window on your component device and adhere the 
IR Flasher eye directly over the IR window on your component device.  

 
NOTE:  One IR Flasher eye is to be used for one component device.

Step 4   I

rovided IR Extender in to   

the IR-IN port on the Receiver and adhering the other end of the IR Extender   
to a vertical surface near the output device. Ensure that the IR Extender is in   
a line of sight to the remote control that controls your source devices.   

 
NOTE:  For Multicast models, receivers two, three and four do not come with an IR Extender.  Additional IR Extenders 
(HDS-IRE) can be purchased separately; visit peerless-av.com for more information.

Step 6   Turn on your display device (TV, monitor, projector, etc.).

Step 3  
to the Receiver. 

S
1. Plug in the power adapter for the Transmitter and the Receiver to nearby   
 available 

power 

outlets.

2. Plug in the power adapter end to the Transmitter and then to the Receiver.
3. The units will automatically turn-on. The average power-on/sync time
 is 

approximately 

two 

minutes.

Tip  

The IR window 

may be easier to 
locate with a direct 
light shining on 
sections of the 
front panel of the 
component device. 
A small flashlight 
works well.

Tip  

Repeat Steps 

3-11 to 
more t
Receiv
(HDS20
HDS20
HDS20

Step 1  Connect the Transmitter to the source devices   
(Blu-ray ™  Disc player, set top box, gaming console, etc.).

Step 9   Turn on the desired source device that is connected to 
the Transmitter.

Step 11  Play the source device content and enjoy up to Full HD 1080p 
wireless entertainment experience.

t   Check the media source resolution. The display device must be able   

to support the resolution of the media source that is being streamed. 
Utilizing the INFO button will allow you to see the resolution data that 
the display device supports. If the display device supports the highest 
resolution of 720p but the source device is outputting 1080p content,   
the content needs to be down-scaled to the maximum resolution of the 
display device, in this case 720p. 

t   Make sure that your display device, source device and the HD Flow Pro units 

are all turned ON and the Receiver is properly connected to the output device. 

t   Verify that the Receiver is set to the appropriate output port.
t   Check the resolution setting of your source device. This may need to be 

changed to a resolution supported by the HD Flow Pro unit. Reference   
the Resolution Chart in the HD Flow Pro Manual for compatibility.   
Reference your source devices’ manual for instruction on changing   
the output resolution.

I

Step 8   Select the output that connects the Receiver to the display using 
the Power/Source Selection Button or the provided remote control. 
The output indicator light will become solid and the HD Flow logo will 
appear on the display device.

Step 10  Select the desired source or device input on the Transmitter   
using the Power/Source Selection Button on the remote control.

t   The HD Flow Pro units are establishing a connection. It can take   

up to two minutes for the HD Flow Pro units to establish a complete 
connection. If after two minutes have passed and the units have not 
established a connection, unplug the power cable, wait 30 seconds 
and reconnect the power supply to the units.

t   Check and verify the power supply connection.

t   Make sure that your source device is turned ON and the cable   

is properly connected.

t   Verify that the Transmitter is set to the appropriate input port.
t  Check 

the 

resolution 

from 

your 

source 

device. 

This 

may 

need 

to 

be changed to a resolution supported by the HD Flow Pro Wireless 
Multimedia Kit. Reference the Resolution Chart in the HD Flow   
Manual for compatibility. Reference your source devices’ manual   
for instruction on changing the output resolution. 

t   Verify that the HD Flow Pro Transmitter and Receiver are within 

the recommended range of 131 feet. Physical obstructions such as 
walls, floors and ceilings between the Transmitter and Receiver may 
decrease the strength of the connection signal and reduce the overall 
transmission range.

t   Make sure that the input/output cables are properly connected.
t   Verify that the Transmitter is set to the appropriate input port.

Warning   

Do not place the HD Flow 

Pro units near other devices that 
emit excessive amounts of heat. 
Increased temperatures may   
cause the HD Flow Pro Transmitter 
or Receiver unit to malfunction  
or stop working.

tep

s

Quick Start Guide for HD Flow Pro Wireless Multimedia Kit  - LIT-0906

© 2012 Peerless Industries, Inc. Peerless-AV™ is a trademark of Peerless Industries, Inc. All rights reserved.

HD Flow™ is a trademark of I Do It, LTD. Other parties’ marks are the property of their respective owners.  hdflow.com

R EADY

®

ISSUED: 06-12-12   SHEET #: 180-9023-1

Models:
HDS200
HDS200-2
HDS200-3
HDS200-4

R EADY

®