Netopia R2020 用户手册
C-12 User’s Reference Guide
Routers B and C (which could also be Netopia R2020s) ser ve the two remote networks that are subnets of
a.b.c.0. The subnetting is accomplished by configuring the Netopia R2020 with connection profiles for Routers
B and C (see the following table).
a.b.c.0. The subnetting is accomplished by configuring the Netopia R2020 with connection profiles for Routers
B and C (see the following table).
The Netopia R2020’s connection profiles for Routers B and C create entries in its IP routing table. One entr y
points to the subnet a.b.c.128, while a second entr y points to the subnet a.b.c.248. The IP routing table might
look similar to the following:
points to the subnet a.b.c.128, while a second entr y points to the subnet a.b.c.248. The IP routing table might
look similar to the following:
Let’s see how a packet from the Internet gets routed to the host with IP address a.b.c.249, which is ser ved by
Router C. The packet first arrives at Router A, which delivers it to its local network (a.b.c.0). The packet is then
received by the Netopia R2020, which examines its destination IP address.
Router C. The packet first arrives at Router A, which delivers it to its local network (a.b.c.0). The packet is then
received by the Netopia R2020, which examines its destination IP address.
The Netopia R2020 compares the packet’s destination IP address with the routes in its IP routing table. It
begins with the route at the bottom of the list and works up until there’s a match or the route to the default
gateway is reached.
begins with the route at the bottom of the list and works up until there’s a match or the route to the default
gateway is reached.
When a.b.c.249 is masked by the first route’s subnet mask, it yields a.b.c.248, which matches the network
address in the route. The Netopia R2020 uses the connection profile associated with the route to connect to
Router C, and then for wards the packet. Router C delivers the packet to the host on its local network.
address in the route. The Netopia R2020 uses the connection profile associated with the route to connect to
Router C, and then for wards the packet. Router C delivers the packet to the host on its local network.
Connection profile
Remote IP address
Remote IP mask
Bits available for host
address
for Router B
a.b.c.128
255.255.255.192
7
for Router C
a.b.c.248
255.255.255.248
3
IP Routing Table
Network Address-Subnet Mask-----via Router------Port--Age--------Type------
----------------------------------SCROLL UP--------------------------------
0.0.0.0 0.0.0.0 a.b.c.1 WAN 3719 Management
127.0.0.1 255.255.255.255 127.0.0.1 lp1 6423 Local
a.b.c.128 255.255.255.192 a.b.c.128 WAN 5157 Local
a.b.c.248 255.255.255.248 a.b.c.248 WAN 6205 Local
----------------------------------SCROLL UP--------------------------------
0.0.0.0 0.0.0.0 a.b.c.1 WAN 3719 Management
127.0.0.1 255.255.255.255 127.0.0.1 lp1 6423 Local
a.b.c.128 255.255.255.192 a.b.c.128 WAN 5157 Local
a.b.c.248 255.255.255.248 a.b.c.248 WAN 6205 Local
---------------------------------SCROLL DOWN-------------------------------
UPDATE
UPDATE