Iomega Network Device 用户手册

DataSafe NAS User’s Manual 

31

5. Next to the 

 option, select the 

 

radio button. 

6. Click 

. 

1. On the primary menu bar, click 

. 

2. On the Network Setup page, click 

. 

3. From the 

 table, select the 

network connection to modify. 

4. On the 

 list, select 

. 

5. Next to the 

 option (see Figure 8 

on page 31), select the 

 

radio button. 

6. Enter the appropriate server name in the box next 

to the 

 button, then click 

. 

7. To add another DNS server, repeat step 5. 
8. When you are finished adding DNS servers, click 

. 

If the IP address is set to be obtained from 
DHCP, and you set DNS manually, the system 
will accept the manual input, and the 
properties on the DataSafe NAS will 
automatically be set to 

 

. However the 

 column of the 

 table on the 

 

page will still show DHCP as the source of the 
IP address. You can go back into the 

properties page to confirm that the 

manual configuration has been saved.