Motorola RDV5100 用户手册

English

To easily program all the features in your radio, 
it is recommended to use the CPS 
Programming Cable and CPS software.

CPS software download is available for free at 
www.motorola.com/RDX

Programming Mode is a special radio mode to 
program basic radio's features by using the 
radio’s panel.

When the radio is set to Programming Mode, 
you are able to read and modify three features: 

•

Frequencies, 

•

Codes (CTCSS/DPL) and, 

•

Auto-Scan. 

The Programming Frequencies feature allows 
you to select frequencies for each channel. 

The Interference Eliminator Code (CTCSS/
DPL) helps minimize interference by providing 
you with a choice of code combinations that 
filter out static, noise, and unwanted 
messages. 

The Auto-Scan feature allows you to set a 
particular channel to automatically enable Scan 
each time you switch to that channel.

As the non-display model does not have a 
display to show the values that are being 
programmed, the radio will communicate this 
information using beeps and LED indications. 

The radio's LEDs will blink two colors: 

•

Orange to signal '0' and, 

•

Red for other values from '1' to '9'. 

Short and long red blinks differentiate the 
specific number the radio is signaling you. 

Please refer to “Programming Mode: Reading 
the Values” table on page 38.