Motorola WN825GP 用户手册

Configuration 

Section 3

 

WN825  

 

 

3-7

Select if your access point requires authentication. Match the 
authentication used by the network. 

Open 

No authentication is used. 

Shared  The Pre-Shared Key (PSK) authentication method is 

used.  

802.1X  IEEE port based network access control authentication 

method is used.  

WPA Wi-Fi

®

 Protected Access (WPA) authentication 

(802.1X) is used with an EAP type. 

WPA-
PSK 

WPA authentication (802.1X) is used with a 
Pre-Shared Key, which enables you to enter a static 
Network key. 

CCKM Cisco

®

 proprietary standard Lightweight Extensible 

Authentication Protocol (LEAP). 

Note: If you select WPA, WPA-PSK, or CCKM, you may be required 
to enter further information on the Authentication tab. Ask your 
network administrator for additional information. 

 

Select the type of security encryption algorithm used. The available 
types of encryption are based on the type of the authentication 
selected. 

Disabled

No encryption. Available only with Open and Shared 
authentication. 

WEP Deselect 

automatically and enter the Key provided by the 
network. Available only with Open, Shared, 802.1X, 
and CCKM Authentication. 

TKIP 

Available with WPA, WPA-PSK, and CCKM 
Authentication. 

AES 

Available with WPA and WPA-PSK Authentication. 

CKIP 

Available with CCKM (Cisco Centralized Key 
Management) Authentication. 

  

Enter the security key for data encryption, when WEP or WPA-PSK is 
selected. This can be entered in ASCII or hexadecimal for WEP and 
in ASCII for WPA-PSK.