Motorola VT2442 用户手册
VT2442 Voice Gateway User Guide
5
Installation
To install your VT2442, you need to:
•
Review
on page 5 and
•
•
Before You Begin
Before you begin installation, check that you received the following items with your VT2442:
In addition to your VT2442 voice gateway, you also need:
•
An established DSL or cable Internet connection
•
One or two touch-tone telephones
•
One or more computers with these minimum requirements:
—
Pentium-class processor or faster
—
16 MB of memory
—
10 MB of hard disk space available
—
Windows
®
98, Windows 98 SE, Windows Me
®
, Windows
NT
®
, Windows XP
™
•
A 10/100Base-T category 3 or better straight-through Ethernet cable with RJ-45 terminators for each
computer to be wired to the network (the yellow cable provided with the voice gateway connects one
computer)
computer)
If you purchased your VT2442 voice gateway from a retail location, you must first activate your Vonage
®
Phone
Service. You will need to provide the WAN MAC ID on the bottom of the VT2442.
•
In the USA, visit
Item
Description
AC
adapter
adapter
Connects the VT2442 to an AC electrical outlet
Ethernet
cables
cables
Blue cable connects the Internet port on your VT2442 to your cable or DSL modem
Yellow cable connects an Ethernet port on your VT2442 to a computer or other network
device
device
Vertical mounting stand
Provides vertical mounting on a desktop or other flat surface to use less space
VT2442 Voice Gateway
Quick Start Guide
Quick Start Guide
Provides instructions to quickly set up and configure your voice gateway