Motorola SBG940 用户手册
43
SBG940 User Guide
X
Exit
Print
Gateway > LAN — nat config Page
Use this page to enable
and add clients to the CURRENT NAT PASSTHROUGH list:
Gateway > LAN — nat config page fields
Field or Button
Description
LAN
Enable NAT
If enabled, the single HFC IP Address (public IP address) assigned by the cable provider is
mapped to many private IP addresses on the SBG940 LAN.
mapped to many private IP addresses on the SBG940 LAN.
Apply
Click to apply your changes. You must reboot the SBG940.
NEW NAT
PASSTHROUGH
PASSTHROUGH
Specifies up to 32 computers as passthrough clients not subject to NAT, using their MAC
addresses.
addresses.
MAC Address
Type the passthrough client MAC address. The format is 16 hexadecimal numerals.
Bypass Firewall
(True DMZ)
(True DMZ)
Select this box to set the NAT passthrough computer as a DMZ client. Use this setting with
extreme caution because a DMZ client is completely open to Internet hackers.
extreme caution because a DMZ client is completely open to Internet hackers.
Add
Click to add the MAC address to the CURRENT NAT PASSTHROUGH list.
CURRENT NAT
PASSTHROUGH
PASSTHROUGH
Lists the computers on the LAN that are configured for NAT passthrough.
Delete
Click to delete the selected MAC address from the NAT passthrough list.