Denon AVR-2312CI 用户手册

99

Use the graphic equalizer to adjust the tone of each speaker.
“Manual EQ” can be set when “MultEQ® XT” setting (

) is “Manual”.

Curve Copy
Copy “Audyssey Flat” curve 
from MultEQ® XT.

Yes : Copy.
No : Do not copy.

• “Curve Copy” is displayed after Audyssey® Auto Setup has been 

performed.

• When you select “Curve Copy” and press 

, the “Set EQ curve to 

Audyssey Flat?” prompt is displayed. Select either “Yes” or “No”, and 
press 

.

Default
The “Manual EQ” settings 
are returned to the default 
settings.

Yes : Reset to the defaults.
No : Do not reset to the defaults.

 When you select “Default” and press 

, 

the “Return all settings to the default?” 
prompt is displayed. Select either “Yes” or 
“No”, and press 

.

Adjust Channel
Correct the tone of each 
speaker.

q

  Select the speaker tone adjustment method.

All : Adjust the tone of all speakers together.
L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.

w

  Select the speaker.

e

  Select the adjustment frequency band.

63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when “L/R” or “Each” is 

selected.

r

  Adjust the level.

–20.0dB – +6.0dB (0.0dB)

Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the 
amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER 
function generates the signals eliminated upon compression, restoring the sound to conditions near those 
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer 
sound with compressed audio signals.

OFF : Do not use RESTORER.
Mode1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.
Mode2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.
Mode3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.

• This item can be set with analog signals or PCM signal (fs = 44.1/48 kHz) is input.
• “RESTORER” settings are stored for each input source.
• This item default setting for “iPod” and “NET/USB” is “Mode3”. All others are set to “OFF”.
• When set to something other than “OFF”, 

 is displayed.

• This cannot be set when the surround mode is set to “DIRECT” or “PURE DIRECT”.

While viewing video, manually adjust the time to delay audio output.

• This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” is set to “ON” and when 

a TV compatible with Auto Lip Sync is connected.

• Store “Audio Delay” for each input source.
• Audio Delay for game mode can be set when “Video Mode” (

) is set to “Auto” or 

“Game”. 

BD