TANDBERG MSE 8510 用户手册

下载
页码 190
39 
 
How MCU media ports are allocated, and which options and settings are available, is controlled by the Media port 
reservation
 setting on the 
Conference settings
 page. 
This is the mode that the unit runs in when the Media port reservation setting is configured as 
, and is the mode 
that the MCU uses by default. With this scheme, you can specify a maximum value for the number of video and 
audio-only ports each conference is allowed to use on the Conference configuration page. These limits are optional, 
and by default there is no configured limit.  
The configured limits are strictly maximum values; in particular, setting such a limit does not guarantee that that many 
participants will be able to join the conference. It is perfectly possible to set these values such that the sum of the 
configured limits across all active conferences exceeds the total number of ports available on the MCU.  
This is the mode that the unit runs in when the Media port reservation setting is configured as 
. With this 
scheme, each conference must be configured with a number of video ports to reserve and a number of audio-only 
ports to reserve. These values differ from the maximum port values set in 
 in a number of ways:  
 
 
As well as being maximum values (i.e. enforcing limits on the number of conference participants), port 
reservation values also guarantee that that many endpoints are able to participate in the conference.  
 
 
In unreserved mode, it is not necessary to specify a number of video or audio-only ports for a conference. In 
reserved mode, however, every conference must have configured reservations for both video and audio-only 
ports.  
 
 
Port reservations guarantee that a certain number of participants will be able to join a conference; because of 
this, the MCU will not permit these reservations to be configured such that the total number of reserved 
ports at any given time exceeds the total number of ports available. See 
 for additional 
information.  
In order to honor configured port reservations, the MCU must ensure that at any given time the number of reserved 
ports does not exceed the total media capacity. This entails some level of clash detection when conferences are 
scheduled or their configuration changed.  
Two conferences are considered to clash if they can ever be active simultaneously. When validating a conference 
schedule, the MCU looks at the maximum number of ports reserved by other conferences which can be active at the 
same time, and checks that the number of ports requested by the conference being added or changed is guaranteed to 
be available. If, for instance, the MCU has 20 video ports available in total, it will not be possible to set up two 
conferences which require 15 video ports each if they are scheduled such that they ever overlap.  
In the simple case of conferences which start at specific times and end at specific times (or, indeed, are permanent), it 
is easy to see whether they clash. The more complex cases involve repetition, and it is important to bear in mind that