DELL 9.7(0.0) 用户手册

• To copy a local file to a remote system, combine the file-origin syntax for a local file location with the 

file-destination syntax for a remote file location.

• To copy a remote file to Dell Networking system, combine the file-origin syntax for a remote file 

location with the file-destination syntax for a local file location.

Table 3. Forming a copy Command

Location

source-file-url Syntax

destination-file-url Syntax

Internal flash: System

copy flash://filename

flash://filename

For a remote file location:
FTP server

copy ftp://
username:password@{hostip 
| hostname}/filepath/
filename

ftp://
username:password@{hostip 
| hostname}/ filepath/
filename

For a remote file location:
HTTP server

copy http://
username:password@{hostip 
| hostname}/filepath/
filename

http://
username:password@{hostip 
| hostname}/ filepath/
filename

For a remote file location:
SCP server

copy scp://{hostip | 
hostname}/filepath/ 
filename

scp://{hostip | 
hostname}/filepath/
filename

For a remote file location:
TFTP server

copy tftp://{hostip | 
hostname}/filepath/ 
filename

tftp://{hostip | 
hostname}/filepath/
filename

Important Points to Remember

• You may not copy a file from one remote system to another.
• You may not copy a file from one location to the same location.
• When copying to a server, you can only use a host name if a domain name server (DNS) server is 

configured.

• The host IP address (hostip) supports IPv4 and IPv6 addresses in the source-file-url and destination-

file-url variables.

• When copying files to and from the system using FTP, HTTP, TFTP, or Telnet, you can specify a default 

IP source interface for the file transfer protocol (ip {ftp | http |tlenet | tftp} source-
interface commands). The IP source interface can be a loopback, port-channel, or physical 

interface.

• HTTP copy operations support egress interface selection (EIS) to isolate management-plane and 

control-plane domains for HTTP traffic. For more information, see 

Example of Copying a File to an FTP Server

Dell#copy flash://FTOS-ZC-9.2.1.0B2.bin ftp://

myusername:mypassword@10.10.10.10//FTOS/FTOS-ZC-9.2.1.0B2

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

94926657 bytes successfully copied

Example of Importing a File to the Local System

core1#$//copy ftp://myusername:mypassword@10.10.10.10//FTOS/

FTOS-ZC-9.2.1.0B2 flash://

Destination file name [FTOS-EF-8.2.1.0.bin.bin]:

Getting Started

49