National Instruments 3.22E+04 用户手册
Chapter 2
Installation and Verification
2-2
ni.com
3.
Click on the Install button.
4.
When prompted, insert the NI-Serial Software for Windows
2000/NT/Me/9x CD, and click on the Next button.
2000/NT/Me/9x CD, and click on the Next button.
5.
When prompted, click on the Finish button to install the program files
from floppy disks or CD-ROM.
from floppy disks or CD-ROM.
6.
The setup wizard begins with the screen shown in Figure 2-2.
Figure 2-2. NI-Serial Setup Screen
The setup wizard guides you through the necessary steps to install the
NI-Serial software. To exit the setup wizard at any time, click on the
Cancel button.
NI-Serial software. To exit the setup wizard at any time, click on the
Cancel button.
7.
If you need to install your hardware, or if this is your first time to install
the NI-Serial software for Windows Me/9x, skip to the next section,
the NI-Serial software for Windows Me/9x, skip to the next section,
. Otherwise, continue to step 8.
8.
If your hardware is already installed, restart Windows Me/9x.
9.
Windows Me/9x should automatically detect your hardware and
display one or more New Hardware Found dialog boxes. Your
operating system (Windows Me/9x) may show the Windows Default
Driver option. If so, make sure the Windows Default Driver is
selected and click on the OK button. If the Windows Default Driver
option is not shown, the installation continues automatically. When
you finish, continue to the
display one or more New Hardware Found dialog boxes. Your
operating system (Windows Me/9x) may show the Windows Default
Driver option. If so, make sure the Windows Default Driver is
selected and click on the OK button. If the Windows Default Driver
option is not shown, the installation continues automatically. When
you finish, continue to the