Cisco Systems 1105 用户手册
1-7
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter 1 Getting Started
Getting Started with Device Management
Note
Login sessions automatically time out after 30 minutes of inactivity.
Getting Started with Device Management
Before you can use WLSE monitoring, configuration, firmware upgrading (or
downgrading), and reporting, you must set up your devices, initiate discovery, and
move devices into the managed state. To get started, follow the directions in the
Quick Start Guide for the CiscoWorks 1105 Wireless LAN Solution Engine or use
the following task list as a general guide.
downgrading), and reporting, you must set up your devices, initiate discovery, and
move devices into the managed state. To get started, follow the directions in the
Quick Start Guide for the CiscoWorks 1105 Wireless LAN Solution Engine or use
the following task list as a general guide.
Table 1-2
Basic Initial Tasks
Task
Description and References
1. Set up devices (access points, bridges,
routers, switches, and AAA servers).
routers, switches, and AAA servers).
for details.
2. Log into the WLSE using a Web browser. Enter the WLSE’s IP address, followed by:1741; for
example, http://209.165.202.128:1741. Use the admin
username and the password you created during initial
setup of the WLSE.
username and the password you created during initial
setup of the WLSE.
3. Enter device credentials.
Device community strings for all managed devices must
be entered on the WLSE. See
be entered on the WLSE. See
.
For access point configuration tasks, HTTP usernames
and passwords must be entered on the WLSE. See
and passwords must be entered on the WLSE. See
4. Initiate discovery from the WLSE or
import devices from a file or from a
CiscoWorks2000 server.
import devices from a file or from a
CiscoWorks2000 server.
If you are using discovery from the WLSE, add seed
devices and enable discovery. You can initiate an
immediate one-time discovery or schedule discovery for
a later time. See
devices and enable discovery. You can initiate an
immediate one-time discovery or schedule discovery for
a later time. See
.
5. Verify the discovery.
On the WLSE, verify that devices were discovered. See
.