Cisco Systems 1105 用户手册
B-37
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Appendix B Command Reference
Privilege Level 15 Commands
Syntax Description
dns-name
Device name of a host on the network.
ip-address
IP address of a host on the network.
Example
The following command translates the device name hostname to its IP address:
nslookup hostname
Server: dns.ex1.com
Address: 209.165.200.224
Name: ex1.com
Address: 209.165.201.0
ntp server
To configure the Network Time Protocol (NTP) and allow the system clock to be
synchronized by a time server, use the ntp server command. To disable this
function, use the no form of this command.
synchronized by a time server, use the ntp server command. To disable this
function, use the no form of this command.
ntp server ip-address
no ntp server ip-address
Syntax Description
ip-address
IP address of the NTP time server providing clock
synchronization.
synchronization.
Usage Guidelines
Use the ntp server command to synchronize the system clock with the specified
NTP server. If you configure multiple NTP servers, the system will synchronize
with the first working NTP server it finds. There is no limit to the number of NTP
servers that you can configure.
NTP server. If you configure multiple NTP servers, the system will synchronize
with the first working NTP server it finds. There is no limit to the number of NTP
servers that you can configure.
The ntp server command validates the NTP server that you specify. The possible
results are:
results are:
•
If the server is a valid NTP server, a message similar to the following appears: