ZyXEL Communications n/a 用户手册

Chapter 20 VoIP Commands

DSL & IAD CLI Reference Guide

This example configures the settings for the analog phone port 1 on the ZyXEL Device. It sets 
the ZyXEL Device the volume it sends to the analog phone to the maximum 14 and it sets the 
volume it sends out from this analog phone to 13.  

Use these commands to configure speed dial entries on the ZyXEL Device.  

ras> voice config fxs index 1 

ras> voice config fxs inputvolume 1 14

ras> voice config fxs outputvolume 1 13 

ras> voice config fxs save 1 

Table 52   Speed Dial Command Summary

voice config phbook index <index> 

Specifies the speed dial entry index for configuration.

voice config phbook active <index> 

<1:active|0:inactive> 

Enables or disables this speed dial entry.

voice config phbook orignum <index> <0~32> 

Sets the SIP number that the ZyXEL Device dials when 
the speed dial number is entered.

voice config phbook forcesipuri <index> 

<1-128> 

Sets the ZyXEL Device to use an IP address or URI to 
complete this speed dial call. This is used for peer-to-
peer calls or calls that use a different SIP server from the 
ones defined in the SIP accounts.

voice config phbook speednum <index> 

<0~32> 

Sets the speed dial number for this speed dial entry. This 
is the number callers must dial to perform this speed dial 
call.

voice config phbook name <index> <name> 

Sets a name for this speed dial entry.

voice config phbook type <index> 

<0:Proxy|1:NonProxy> 

Specifies whether this entry should use an existing SIP 
account (proxy) or whether it should be a call to a SIP 
server not specifed in the SIP accounts configured on the 
ZyXEL Device (non-proxy).

voice config phbook save <index> 

Saves the speed dial entry in the working buffer to non-
volatile memory. 
The working buffer is a volatile memory space. The 
settings in the working buffer are not applied to the 
ZyXEL Device until you execute this command.

voice config phbook display <index> 

Displays the saved values for the speed dial entry. 

voice config phbook dumpCfg <index> 

Displays the configured values in the working buffer for 
the specified configuration.

voice config phbook free 

Clears the working buffer. Any unsaved changes are lost.