ZyXEL Communications n/a 用户手册
DSL & IAD CLI Reference Guide
35
C
H A P T E R
4
IEEE 802.1x Commands
Use these commans to configure IEEE 802.1x authentication on the ZyXEL Device.
4.1 Command Summary
The following section lists the commands for this feature.
Table 8 8021x Command Summary
COMMAND
DESCRIPTION
8021x debug level <debug-level> [filter
<mac-address>]
Sets the IEEE 802.1x debug message level. Optionally,
specifies the MAC address of the debug target.
specifies the MAC address of the debug target.
debug-level
: the following are the debug levels
available, type the number in parenthesis () to activate
the debug level.
•
the debug level.
•
debug packet (1)
•
debug state machine (2)
•
debug timer (4)
•
debug supplicant (8)
•
debug error (16)
•
debug backend server (32)
•
debug function (64)
•
debug vlantag (128)
type 0 to turn all debugging off.
8021x debug trace
Displays all supplicants (users and/or clients which are
going to be authenticated) in the supplicants table.
going to be authenticated) in the supplicants table.
8021x debug user <username>
Displays the specified user status in the supplicant table.
8021x show showkey
Displays details about the authentication key used for
IEEE 802.1x authentication.
IEEE 802.1x authentication.
8021x set mode <WPA_PSK|others>
Sets the IEEE 802.1x security mode.
Note: At the time of writing only WPA-PSK can
be selected.
8021x set key <key>
Sets the IEEE 802.1x key. The key must consist of ASCII
characters including spaces and symbols and must be
between 8-63 characters long.
characters including spaces and symbols and must be
between 8-63 characters long.
8021x set save
Saves the IEEE 802.1x configuration settings.