DELL D600 用户手册
When you connect the computer to an electrical outlet or install a battery while the computer is connected to an electrical outlet, the computer checks the
battery charge and temperature. If necessary, the AC adapter then charges the battery and maintains the battery charge.
battery charge and temperature. If necessary, the AC adapter then charges the battery and maintains the battery charge.
If the battery is hot from being used in your computer or being in a hot environment, the battery may not charge when you connect the computer to an
electrical outlet until the battery is allowed to cool.
electrical outlet until the battery is allowed to cool.
."
Removing a Battery
For more information about removing the second battery, see "
1.
Ensure that the computer is turned off, disconnected from an electrical outlet, and disconnected from the telephone wall jack.
2.
If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.
3.
Slide and hold the battery-bay latch release on the bottom of the computer, and then remove the battery from the bay.
Removing and Installing a Reserve Battery
1.
2.
Remove the reserve battery cover.
CAUTION:
Before performing these procedures, turn off the computer, disconnect it from the electrical outlet, and disconnect the modem from the
telephone wall jack.
CAUTION:
Before performing any of the following procedures computer, read and follow the safety instructions in your Product Information
Guide.
NOTICE:
before the computer shuts down and loses any unsaved data.
CAUTION:
Before performing any of the following procedures computer, read and follow the safety instructions in your Product Information
Guide.