DELL D600 用户手册

下载
页码 121
  
 
 Using the Module Bay  
Dell™ Latitude™ D600 Systems User's Guide
 
  
 
  
  
 
  
 
  
 
 
About the Module Bay  
You can install devices such as a floppy drive, CD drive, CD-RW drive, DVD drive, CD-RW/DVD drive, DVD+RW, second battery, or second hard drive in the 
module bay. 
Your Dell™ computer ships with an optical drive installed in the module bay. However, the device screw is not installed in the optical drive but packaged 
separately. When you install your device in the module bay, you can install the device screw. 
 
Checking the Charge on the Second Battery  
Before you install a second battery, press the status button on the battery charge gauge to illuminate the charge level lights. Each light represents 
approximately 20 percent of the total battery charge. For example, if the battery has 80 percent of its charge remaining, four of the lights are on. If no lights 
appear, the battery has no charge. 
  
 
Removing and Installing Devices While the Computer Is Turned Off  
 
 
Your computer ships with an optical drive installed in the module bay. However, the device screw is not installed in the optical drive but packaged separately. 
When you install your device in the module bay, you can install the device screw. 
 
 
 
NOTE: 
You do not need to install the device screw unless you want to secure the module inside the computer for security purposes.
 
NOTE: 
Battery capacity (the time it can hold a charge) decreases over time. Depending on how often the battery is used and the conditions under which 
it is used, you may need to purchase a new battery during the life of your computer.
1  status button on the 
battery charge gauge 
2  second battery (bottom) 
 
NOTE: 
 
CAUTION: 
Before performing any of the following procedures computer, read and follow the safety instructions in your Product Information 
Guide. 
 
NOTE: 
You do not need to install the device screw unless you want to secure the module inside the computer for security purposes.