DELL D600 用户手册

Invalid configuration information-please run System Setup Program —

The system configuration information does not match the

hardware configuration. The message is most likely to occur after a memory module is installed. Correct the appropriate options in the
system setup program. See "

Using the System Setup Program

Keyboard clock line failure —

For external keyboards, check the cable connection. Run the Keyboard Controller test as described in "

Using

the Dell Diagnostics

Keyboard controller failure —

For external keyboards, check the cable connection. Restart the computer, and avoid touching the keyboard

or the mouse during the boot routine. Run the Keyboard Controller test as described in "

Using the Dell Diagnostics

Keyboard data line failure —

For external keyboards, check the cable connection. Run the Keyboard Controller test as described in "

Using

the Dell Diagnostics

Keyboard stuck key failure —

For external keyboards or keypads, check the cable connection. Restart the computer, and avoid touching the

keyboard or keys during the boot routine. Run the Stuck Key test as described in "

Using the Dell Diagnostics

Memory address line failure at address, read value expecting value —

A memory module may be faulty or improperly seated.

Reinstall the

memory modules

and, if necessary, replace them.

Memory allocation error —

The software you are attempting to run is conflicting with the operating system, another program, or a utility.

Turn off the computer, wait 30 seconds, and then restart it. Try to run the program again. If the error message still appears, see the
software documentation.

Memory data line failure at address, read value expecting value —

A memory module may be faulty or improperly seated.

Reinstall the

memory modules

and, if necessary, replace them.

Memory double word logic failure at address, read value expecting value —

A memory module may be faulty or improperly seated.

Reinstall the memory modules

and, if necessary, replace them.

Memory odd/even logic failure at address, read value expecting value —

A memory module may be faulty or improperly seated.

Reinstall

the memory modules

and, if necessary, replace them.

Memory write/read failure at address, read value expecting value —

A memory module may be faulty or improperly seated.

Reinstall the

memory modules

and, if necessary, replace them.

No boot device available —

The computer cannot find the floppy disk or hard drive. If the floppy drive is your boot device, ensure that a

bootable floppy disk is in the drive. If the hard drive is your boot device, ensure that the drive is installed, properly seated, and partitioned
as a boot device.

No boot sector on hard drive —

The operating system may be corrupted.

Contact Dell

No timer tick interrupt —

A chip on the system board may be malfunctioning. Run the System Set tests as described in "

Using the Dell

Diagnostics

Non-system disk or disk error —

A floppy disk is in the floppy drive. Remove the floppy disk and restart the computer.

Not a boot diskette —

The operating system is trying to boot to a nonbootable floppy disk. Insert a bootable floppy disk.

Operating system not found —