3M C3266PW 用户手册
16
3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information – TSD-39373 REV E
For more information on adjusting the desktop area/resolution, color depth, or refresh
rate, refer to the user manual that came with your video card. If you change the
resolution, it is a good idea to calibrate your sensor.
rate, refer to the user manual that came with your video card. If you change the
resolution, it is a good idea to calibrate your sensor.
Supported Video Display Modes and Refresh Rates
Your video card should support one of the display modes specified below. If you select
an unsupported video mode, the display may stop working or display unsatisfactory
picture quality.
an unsupported video mode, the display may stop working or display unsatisfactory
picture quality.
Display Mode
Refresh Rate (Hz)
640 x 480
60
800 x 600
60
1024 x 768
60
1152 x 864
70
1280 x 720
60
1280 x 768
60
1280 x 960
60
1280 x 1024
60
1360 x 768
60
1366 x 768
60
1600 x 1200
60
1680 x 1050
60
1920 x 1080
60
Configuring the Display Settings
After you connect your Multi-Touch Chassis Display and turn on your computer, you
may need to configure one or more of these display settings. The ideal setting for the
Multi-Touch Chassis Display is as follows:
may need to configure one or more of these display settings. The ideal setting for the
Multi-Touch Chassis Display is as follows:
•
Display mode (also called desktop area or video native resolution) 1920 x 1080
•
Refresh rate (also called vertical scan rate or vertical sync) 60 Hz
•
Color depth (also called color palette or number of colors) at least 16-bit (high color)
Adjusting the Multi-Touch Chassis Video Display
This section provides guidelines for adjusting the video display and using the display
controls to adjust the image to your liking. The controls for adjusting the video display
are located on the back of the Multi-Touch Chassis Display. These buttons let you
display the on-screen menu and adjust the phase, image position, contrast, and
brightness. Before you make any adjustments:
controls to adjust the image to your liking. The controls for adjusting the video display
are located on the back of the Multi-Touch Chassis Display. These buttons let you
display the on-screen menu and adjust the phase, image position, contrast, and
brightness. Before you make any adjustments:
•
Be sure to adjust the controls in your normal lighting conditions.
•
Display a test image or pattern whenever you adjust the video.