Insignia NS-PNC5011 产品宣传页

1  Take the battery cover off.
2  Insert two AAA batteries (included) into the battery compartment. 

Make sure that the + and - signs match the symbols in the compartment.

3  Replace the cover.

1  Plug the nano receiver into the USB port on your computer.
2  Slide the ON/OFF switch on your mouse to ON.
  The computer automatically detects the mouse and keyboard and you 

can immediately begin using them.

If the mouse or keyboard does not work:
•  Re-plug the nano receiver into the USB port on your computer, then 

press the connect button on the mouse and keyboard. The LED 
indicators on the mouse and keyboard flash steadily while in pairing 
mode (10 seconds). After pairing successfully, the LED indicators light 
solid for 10 seconds, then turn off.

•  Check the batteries in your mouse or keyboard. The LED indicators blink 

for 10 seconds when the batteries are low.

Keyboard:
•  Dimension (L×W×H): 17.1 × 5.6 × .8 in. (43.4 × 14.3 × 2.06 cm)
•  Weight: 16.9 oz. (.5 kg)
•  Rating: 3V C.C. - 4mA
•  Radio frequency: 2.4Ghz
•  Operating distance: 33 feet (10 meters)
•  Key number: 104 keys (US)
•  Battery: 2 AAA alkaline batteries
•  Battery life: 6 months (based on average usage)
Mouse:
•  Dimension (L×W×H): 3.9 × 2.2 × 1.4 in. (9.90 × 6.20 × 3.67 cm)
•  Weight: 1.9 oz. (.05 kg)
•  Battery: 1 AA battery
•  Battery life: 6 months (based on average usage)
•  Radio frequency: 2.4Ghz
•  Operating distance: 33 feet (10 meters)
•  Rating: 3V C.C. - 10mA
Nano receiver:
•  Dimension (L×W×H): .7 × .6 × .2 in. (1.8 × 1.4 × .6 cm)
•  Weight: .04 oz. (.001 kg)
•  Interface: USB 1.1, 2.0 , 3.0

My mouse or keyboard is not working.
•  Make sure that your mouse and keyboard are turned on. 
•  Move your keyboard and mouse closer to your computer.
•  Make sure that your computer meets the system requirements.
•  Only use the mouse on a clean, flat, non-slippery surface to ensure smooth and 

accurate cursor action.

•  Avoid using your mouse on reflective, transparent, or metallic surfaces.
•  If your mouse or keyboard stops working:
  •  Make sure that your mouse or keyboard and nano receiver are paired by

  pressing the connect button on the mouse or keyboard.

  •  Replace the mouse or keyboard batteries.
  •  Try connecting your nano reciver into a different USB port on your computer.

LED indicator

Red LED is on for 10 seconds, then turns off.

Red LED blinks for 10 seconds.

Red LED blinks for 10 seconds after pressing 
the Connect button.

After pressing the Connect button, the LED 
blinks for 10 seconds, then turns off.

After pressing the Connect button, the LED 
blinks, then lights solid for 10 seconds.

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
•  Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment.
RSS-Gen and RSS-210 statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, 
and (2) this device must accept any interference, including interference that may cause undesired 
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio 
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit 
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage 
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 statement
This equipment complies with Industry Canada radiation exposure limits set forth for an 
uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies 
pour un environnement non contrôlé.

For complete warranty, visit www.insigniaproducts.com.

1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved. 
Made in China  

•  Wipe the mouse and keyboard with a damp, lint-free cloth.

LED

indicator

2 AAA batteries

V2 ENGLISH 14-0235

NS-PNC5011_NS-PNC5011-C_14-0235_QSG_V2_EN.ai   2   3/11/2014   9:35:46 AM

NS-PNC5011_NS-PNC5011-C_14-0235_QSG_V2_EN.ai   2   3/11/2014   9:35:46 AM