Philips 241P4QPYK 用户手册
25
5. Ergosensor
5. ErgoSensor
(Available for 241P4QRY)
Philips ErgoSensor is an innovative technology that advises users on how to sit in an ergonomically
correct position at their computer. It uses a built-in sensor in the monitor to sense and measure the
user’s behavior in terms of presence, posture and usage and then gives feedback for corrective actions.
Philips ErgoSensor is an innovative technology that advises users on how to sit in an ergonomically
correct position at their computer. It uses a built-in sensor in the monitor to sense and measure the
user’s behavior in terms of presence, posture and usage and then gives feedback for corrective actions.
Hot key
Setting
You can turn the Philips ErgoSensor On or Off, and turn demo mode
On with a simple button on the bezel.
You can turn the Philips ErgoSensor On or Off, and turn demo mode
On with a simple button on the bezel.
Demo mode
ErgoSensor monitor has a built in demo mode to demonstrate how
WKHGHWHFWLRQDQGQRWLÀFDWLRQPHVVDJHV\VWHPZRUNV$FWLYDWLRQ
method: (A) 15 degrees neck-tilt for
angle detection. (B) 3mins for time break
activation. (C) >90cm and < 70cm for
distance activation.
ErgoSensor monitor has a built in demo mode to demonstrate how
WKHGHWHFWLRQDQGQRWLÀFDWLRQPHVVDJHV\VWHPZRUNV$FWLYDWLRQ
method: (A) 15 degrees neck-tilt for
angle detection. (B) 3mins for time break
activation. (C) >90cm and < 70cm for
distance activation.
How does it work?
9LHZLQJGLVWDQFH
If user is found sitting outside of optimal ergonomic
zone of 70-90cm, a message is generated.
If user is found sitting outside of optimal ergonomic
zone of 70-90cm, a message is generated.
9LHZLQJDQJOH
If user’s posture is detected with a neck angle tilted
more than 15 degrees, a message is generated.
If user’s posture is detected with a neck angle tilted
more than 15 degrees, a message is generated.
9LHZLQJWLPH
If the user is found to be continuously using
computer for more than one hour, a time break
reminder is generated.
If the user is found to be continuously using
computer for more than one hour, a time break
reminder is generated.
3RZHUVDYLQJ
A. User detected on seat, monitor operates normally
A. User detected on seat, monitor operates normally
B. If user is not detected on seat, monitor brightness dimmed
after 1 minute, saving power
after 1 minute, saving power
C. Monitor turns off after 3 minutes, and then enters standby
mode, saving powerD. User returns to the seat, ErgoSensor returns monitor to normal operation
immediately.
mode, saving powerD. User returns to the seat, ErgoSensor returns monitor to normal operation
immediately.
Off
Demo
Watt
Watt