Panasonic AJ-SD930BE 用户指南
73 (E)
RS-232C interface
3. Return format
[VTR 5 controller (PC)]
The following responses are made to the command. If
necessary, more than one response is made.
necessary, more than one response is made.
$
When the communication has terminated
normally
1. The receive completion message is returned.
normally
1. The receive completion message is returned.
[ACK]
06h
2. The execution completion message is returned.
[STX] [command] [data] [ETX]
02h
XX XX XX
XX.....XX
03h
[command] :
This is the message (data) which is returned or
the execution completion message identifier.
the execution completion message identifier.
[data] :
This is the data to be returned. It can be omitted.
Example:
Send command
Send command
Return message (data)
[STX] OPL [ETX] 5 [ACK] [STX] OPL [ETX]
$
When the communication has terminated
abnormally
abnormally
[NACK]
15h
$
When processing is not possible due to
incorrect data or trouble in the VTR
1. The receive completion message is returned.
incorrect data or trouble in the VTR
1. The receive completion message is returned.
[ACK]
06h
2. An error code is returned.
[STX] [E R N
1
N
2
N
3
] [ETX]
02h
Error code
03h
4. Error code table
ER001 : Invalid command
O
Unsupported command received.
O
Error in command execution
ER002 : Parameter error
ER102 : VTR mode error (front loading motor)
ER103 : VTR mode error (loading motor)
ER104 : VTR mode error (drum, capstan system)
ER105 : VTR mode error (reel system)
ER106 : VTR mode error (tension system)
ER108 : VTR dew error
ER1FF : VTR system error
ER102 : VTR mode error (front loading motor)
ER103 : VTR mode error (loading motor)
ER104 : VTR mode error (drum, capstan system)
ER105 : VTR mode error (reel system)
ER106 : VTR mode error (tension system)
ER108 : VTR dew error
ER1FF : VTR system error