Epson CX4600 用户手册
Epson Stylus
®
CX4600
Start Here
1
Open the paper support and pull up its extensions.
2
Open the output tray and pull out its extension.
3
Flip the feeder guard forward.
4
Slide the edge guide left.
5
Load paper against the right edge guide and slide the left edge
guide over.
guide over.
6
Flip the feeder guard back.
4
Insert the cartridges in the holder for each color.
5
Press the cartridges down until they click.
6
Close the ink cartridge cover and press it down.
7
Close the scanner.
8
Press the
ink button to charge ink. Charging takes about 2 minutes.
Caution: Don’t turn off the CX4600 while the On light is flashing or you’ll
waste ink.
waste ink.
Remove all the tape.
If any of these parts are missing, contact Epson
®
as described on the back
of this sheet.
Unpack
Turn over
1
5
Load Paper
Caution: Don’t load paper before installing the ink cartridges.
1
Lift up the scanner.
2
Open the ink cartridge cover.
3
Shake the ink cartridges, then unpack them.
Install Ink Cartridges
4
4 ink cartridges
4049973-00 XXX
continue
1
Lift up the scanner.
2
Remove the tape from the ink cartridge holder.
3
Close the scanner.
Unlock the Printer
2
1
Connect the power cable.
2
Press the
On button.
Turn On the CX4600
3
Paper support
Output tray