Husqvarna 67521 HV 用户手册

Your lawnmower is shipped without oil in the engine. For type 
and grade of oil to use, see “EN GINE” in the Maintenance 
section of this manual.

1.    Be sure lawnmower is level.  

2.    Remove oil dipstick from oil fi ll spout.

3.   You receive a container of oil with the unit.  Slowly 

pour the entire container down the oil fi ll spout into the 
engine.

NOTE: Initial oil fi ll requires only 18 oz. due to residual oil 
in engine from the manufacturers 100% quality testing. 
When changing oil you may need 20 oz.

4.    Insert and tighten dipstick.

IMPORTANT:

•      Check oil level before each use.  Add oil if needed.  Fill 

to full line on dipstick.

•         Change the oil after every 25 hours of operation or each 

season.  You may need to change the oil more often 
under dusty, dirty conditions.  See “TO CHANGE EN-
GINE OIL” in the Maintenance section of this manual.

1.   Open round door of discharge chute to move starter 

rope out and away from grass catcher.

2.    Remove grass catcher with clippings from lawn mower 

using both front and rear handles.

3.    Empty clippings from bag using rear handle and strap.  

The weight of the grass will open the door.

4.   Snap door shut over frame before installing grass 

catcher on mower.

NOTE:  Do not drag the bag when emptying;  it will cause 
unnecessary wear.