Napoleon Fireplaces Savoy 用户手册

下载
页码 12
1
W415-0257 /  08.02.01
INST
INST
INST
INST
INSTALLA
ALLA
ALLA
ALLA
ALLATION 
TION 
TION 
TION 
TION  AND OPERA
AND OPERA
AND OPERA
AND OPERA
AND OPERATION INSTR
TION INSTR
TION INSTR
TION INSTR
TION INSTRUCTIONS FOR
UCTIONS FOR
UCTIONS FOR
UCTIONS FOR
UCTIONS FOR
LISTED RADIANT SP
LISTED RADIANT SP
LISTED RADIANT SP
LISTED RADIANT SP
LISTED RADIANT SPA
A
A
A
ACE HEA
CE HEA
CE HEA
CE HEA
CE HEATING 
TING 
TING 
TING 
TING  APPLIANCE
APPLIANCE
APPLIANCE
APPLIANCE
APPLIANCE
MODEL:  
SAVOY
INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.
THESE STOVES HAVE BEEN TESTED AND LISTED BY WARNOCK HERSEY LTD. TO STANDARDS: CAN / ULC-S627-00.
Fax: (705)722-6031       Email: ask@napoleon.on.ca
Web: www.napoleon.on.ca
Wolf Steel Ltd., RR#1, 9 Napoleon Rd.,
Barrie, ON., Canada  L4M 4Y8  (705)721-1212
WARNING:  If this stove is not properly installed, a house fire may result.
FOR YOUR SAFETY
Follow  the installation directions. This stove can be very hot when burning. Combustible materials such as
firewood, wet clothing, etc. placed too close can catch fire. Children and pets must be kept from touching the
stove when it is hot. The chimney must be sound and free of cracks. Before installing this unit, contact the
local building or fire authority and follow their guidelines.
Operate only with door tightly closed. Burn wood directly on cast grate supplied. Do not elevate the fire. At
least 14 square inches (90 sq.cm.) of outside air must be admitted to the room. This stove is designed to burn
natural wood only. Higher efficiencies and lower emissions generally result when burning air dried seasoned
hardwoods, as compared to softwoods or too green or freshly cut hardwoods. Do not start a fire with chemicals
or fluids such as gasoline, engine oil, etc. Do not burn treated wood, coal, charcoal, coloured paper, cardboard,
solvents or garbage which tend to produce more pollution than wood. Do not let the stove become hot enough
for any part to glow red.
KEEP THE STOVE TOP TEMPERATURE BELOW 700°F (371°C). Attempts to achieve heat output rates that
exceed stove design specifications can result in metal distortion and damage.