Hamilton Beach HB-165 用户手册

下载
页码 12
1
1.  IMPORTANT SAFEGUARDS 
WARNING! Shock Hazard: Always unplug the steam cleaner from the electrical outlet 
before opening the container, or before connecting/disconnecting the attachments.
When using the steam cleaner, basic safety precautions should always be observed, including 
the following.
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
WARNING!
 To reduce the risk of fire, electric shock, or injury:
1.  always fully extend the power cord before use.  
2.  do not handle the plug or steam cleaner with wet hands.
3.  do not use outdoors.
4.  Never turn the steam cleaner over or on its side when in use. Never direct steam 
towards people, animals, plants, and equipment with electrical components.
5.  do not immerse the steam cleaner into water or any other liquid. always unplug the 
power cord from the electrical socket when filling the steam cleaner with water.
6.  do not leave the steam cleaner unattended while plugged in.
7.  always unplug the steam cleaner before connecting or disconnecting the 
accessories. To unplug, grasp the plug and not the cord.
8.  This appliance is not intended for use by children or persons with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have 
been given supervision or instruction concerning the use of the appliance by a person 
responsible for their safety.
9.  Never put descaling, aromatic, alcoholic or detergent products into the steam cleaner.
10.  do not operate without safety cap in place.
11.  Before filling, proceed as follows: 
1.  Unplug the power supply.
2.  Relieve the pressure by depressing steam delivery button.
3.  allow the steam cleaner to cool down for five (5) minutes.
4.  Relieve any built up pressure again by depressing steam delivery button.
5.  slowly unscrew the safety cap and wait 30 seconds before removing.
12.  Use only the recommended attachments. Use only as described in this manual.
13.  The attachment nozzle tips will get hot during use. do not touch any hot surfaces. 
allow the attachments to cool down before replacing them while the appliance is 
being used.